Home>Product> PET Bottle Making Machine > Semi Automatic PET Bottle Making Machine

casino welcome bonus no deposit,harrahs online casino pa,betway sign in bonus,5 Litres PET Bottle Making Machine Semi Automatic

MS-5L1 is fit for blowing PET packages under 5litre, such as soft drink bottles, pure water bottles, cosmetics bottles and hot-filling bottles.

5 Litres PET Bottle Making Machine Semi Automatic

Product Introduction

5 litres PET bottle making machine semi automatic MS-5L1 is manufactured under CE standard. It is easy and safe to operate, and it can be operated by only one un-skilled operator. MS-5L1 is fit for blowing PET packages under 5litre, such as soft drink bottles, pure water bottles, cosmetics bottles and hot-filling bottles.

Product Parameter




350-400 BPH



Mold Max. Width X Height

340 X 480 mm


bottle capacity



25-120 mm

Max Diameter

170 mm


Heater Qty.

20 PCS

Total Power

25 KW



Air Resource

Operation pressure

0.8-1.0 Mpa

betway live roulette pressure

2.6-4.0 Mpa

Dimension & Weight

Main machine

1890*950*1980 (mm)


1650*700*1700 (mm)


1800 KGS



2 years

Product Feature

1.Equipped with microcomputer control, easy to operate

2.Output up to 400 for 5L with one-cavity blow mold 

3.Heaters are adjustable in height and horizontal to suit various preforms design

4.Heating elements is high efficiency Infrared Heaters, controlled by imported solid state. 

5.The driven part is equipped with three phases motor, stable running. 

6.There are different air storage tanks inside the main machine,  separate for high pressure and low pressure, with pressure regulator. 


Packaging & Shipping

Port: NingBo or Shanghai

Lead Time: 45 working days


Industry Tips (Trouble shooting during PET Blow Molding and Solution)

Not Fully Formed


1.Unstable bottle. 

2.Height change (under specification). 

3.Decrease in capacity. 


5.Too cold. 


1.Insufficient main blow pressure rate or main blow too slow, material movement stalls before reaching the corners. Can be as a result of a blow nozzle leak. 

2.Heavy base weight. Main blow pressure inadequate to move material into the corners. 

3.Excessive pre-blow pressure or time. If too much of the petal is formed before main blow starts insufficient hot material will be left to form the feet correctly. Corners are likely to be thin. Pre-blow too large. Reduce or blow later. 

4.Feet will not form on the corners opposite an off centre sprue. Insufficient compressed air supply. 


1.Check the main blow pressure and increase if possible. If station related, check for main blow leaks from nozzle or stretch rod. 

2.Increase main blow time. 

3.Reduce base weight by reducing preform temperature until pearlescence is evident, then increase preforms lower body temperature. 

4.Fix off-centre base (see Off-Centre Base). 

5.Move main blow pressure cam sooner. 

6.Check there is sufficient compressed air supply. 

7.Check status of compressed air supply. 

betway lucky 7betway naijabetway online bettingbetway pokerbetway scoresbetwinner betbetwinner bonuscampo betcasino gurucasumo