It is widely used to produce PET water bottles ranging from 6L to 20L (2 to 5 gallon). We can provide performs and various blow molds for 3gallon and 5gallon bottles to meet customer's requirements.
20L PET bottle making machine semi automatic MS-20 has been improved based on traditional semi model. It is widely used to produce PET water bottles ranging from 6L to 20L (2 to 5 gallon). We can provide performs and various blow molds for 3gallon and 5gallon bottles to meet customer's requirements
60-240 bottles per hour
Mold Max. Width X Height
480 X 600 mm
Rated General Power
Dimension & Weight
The complete production line for making 5 Gallon PET bottle our factory supply includes:
1.Main blower 1 unit
2.Preform Infrared Heating Oven 1 set
3.Chilling type air dryer (with built in rear/front filter) 1 set
4.Low pressure air compressor 12bars /0.8M3 1 set
5.High pressure air compressor 30 bars/0.7M3 1 set
6.Blow mould for 5 Gallon bottle 1 cavity 1 unit
7.Water Chiller 1 set
Q1: How to tell us your enquiry?
A1: You can contact us by email, phone call, fax, Instant Messenger (Trademanager, WhatApp) and let us know your requirement.
Q2: Is there complete machine include bottle mould and air compresor?
A2: Yes, we offer complete line including air compressor, air dryer and chiller. We will help you to get suitable model for your requirements.
Industry Tips (Trouble shooting during PET Blow Molding and Solution)
HOT SIDES – (TOO WARM)
Inconsistent haze around the bottle, at its worst almost surrounding the
bottle. Often a vertical line wider at the bottom than at the top may be
evident. Evidence of overheating is present; severe dimples and pearlescence may be evident below the haze and will be worse on off-centre base.
1.Inconsistent preform rotation through the oven.
2.Insufficient surface cooling of the preform.
3.Oven shields touching the preform.
4.Air diffuser on blow nozzle may be damaged.
1.Check the preform for a drag mark. Ensure oven shields are not touching the preform. Check collet, spindle or mandrel rotation.
2.Check oven ventilation and increase airflow if necessary.
3.Check oven shield set up.
4.Check air diffuser for damage.