Cosmetic Bottles Fully Automatic Blow Moulding Machine Model ECO-4S is excellent fully automatic model for cosmetics PET package production. On ECO-4S pet blowing machine, very high volumes are produced. Little restriction on bottle design. Preforms can be sold as a completed item for a third party to blow. Is suitable for cylindrical, rectangular or oval bottles.
4,600~5,000 bottles per hour
Preform feeding; Preform transferring
50ml - 750 ml
Rated General Power
Electricity and Pneumatic
0.8-1.0 Mpa / 8-10bar
betway live roulette pressure
2.6-4.0 Mpa / 30bar
High Pressure Air Consumption (based on 500ml)
Dimension & Weight
Main machine Size
According to customers country
Constant running preform-feeding system
High-tech polymers chain: light weight, no tear and wear, no deformation, low maintenance cost
Auto Self-lubricate bushing and sealed bearing
Chain pitch based on specific neck dimensions, to optimize production
Auto-ejecting system for not well-formed or defect preforms
Quick-change system (option) for different neck diameters in less than 5 minutes
Toggle mechanism System in Mold Clamping, for high speed actions and fast cycles.
High pressure Compensation for further locking.
Less Change Overtime required.
High efficient cooling tunnel distributed in blow mold.
Automatic central lubrication.
1.High pressure Compressor;
2.Low pressure Compressor;
3.Air purify System ;
We offer all auxiliary machines, help you to set up complete production line.
Industry Tips (Trouble shooting during SBM and Solution)
Flat sides are usually found at the vertical part lines of the blow moulds. They may also be found anywhere air can be trapped during the blowing process but are more likely on the parting lines of the blow mould or on the feet.
1.Feet not blown due to a low main blow.
2.Feet not blown due to blocked vents.
3.Flat on parting line due to incorrectly set compensation.
4.Flat on parting line due to no compensation on machine (older generation equipment).
1.Check compensation pressure on moulds.
2.Clear vents on feet.
3.Check compensation setting on moulds.
4.Check main blow pressure.